Credov

C1109 fault code: what it means

C1109: ABS/VDC unit supply voltage too low (under about 10 V) or too high (over about 16 V). Often set by a weak battery or charging fault.

Chassis (brakes, steering, suspension) · Minor

Usual causes, most likely first

  1. weak or flat battery
  2. alternator over- or under-charging
  3. ABS fuse, wiring or earth fault
  4. ABS actuator/control unit

C1109 by make

Nissan

ABS/VDC unit supply voltage too low (under about 10 V) or too high (over about 16 V). Often set by a weak battery or charging fault.

Usual causes: weak or flat battery; alternator over- or under-charging; ABS fuse, wiring or earth fault; ABS actuator/control unit

What the repair usually costs

Not sure what C1109 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.