Credov

C1336 fault code: what it means

C1336: Deceleration sensor zero-point calibration not done on a Lexus. VSC lights stay on until calibrated.

Chassis (brakes, steering, suspension) · Minor

Usual causes, most likely first

  1. calibration not done after repairs
  2. sensor or ECU replaced

C1336 by make

Lexus

Deceleration sensor zero-point calibration not done on a Lexus. VSC lights stay on until calibrated.

Usual causes: calibration not done after repairs; sensor or ECU replaced

Toyota

Deceleration (G) sensor zero-point calibration not done. VSC lights stay on until the sensor is calibrated with a scan tool.

Usual causes: sensor or skid control ECU replaced without calibration; battery disconnected during repairs

Not sure what C1336 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.