Credov

C1345 fault code: what it means

C1345: Linear solenoid valve offset learning not done (Lexus brake/VSC), usually after brake actuator or ECU work. Needs the learning procedure.

Chassis (brakes, steering, suspension) · Minor

Usual causes, most likely first

  1. brake actuator or ECU replaced without learning
  2. battery disconnected during brake work

C1345 by make

Lexus

Linear solenoid valve offset learning not done (Lexus brake/VSC), usually after brake actuator or ECU work. Needs the learning procedure.

Usual causes: brake actuator or ECU replaced without learning; battery disconnected during brake work

Toyota

Linear solenoid valve offset learning not done (Toyota brake/VSC). Usually after brake actuator or ECU work; needs the learning procedure with a scan tool.

Usual causes: brake actuator or skid control ECU replaced without learning; battery disconnected during brake work; learning procedure not completed

What the repair usually costs

Not sure what C1345 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.