Jeep
Meaning depends on module: in the Renegade rear drive module (DTCM) it is an ETM Hall sensor fault, AWD may not work; in the Compass power steering module it is ECU over-temperature.
C2210 fault code: what it means
C2210: Meaning depends on module: in the Renegade rear drive module (DTCM) it is an ETM Hall sensor fault, AWD may not work; in the Compass power steering module it is ECU over-temperature.
Usual causes, most likely first
- DTCM software (Renegade)
- ETM Hall sensor/actuator
- EPS overheating or water intrusion (Compass)
C2210 by make
What the repair usually costs
- Parking sensor replace, one sensorNZ$130–NZ$520 · A$130–A$510
- Power steering fluid flushNZ$90–NZ$210 · A$90–A$220
Not sure what C2210 means on your car? Ask Credov.
Before you clear it
Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.
Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.