Credov

P0075 fault code: what it means

P0075: Intake valve timing control solenoid circuit open or shorted. VTC stops working: rough idle, flat performance.

Engine and gearbox (powertrain) · Minor

Usual causes, most likely first

  1. intake valve timing control solenoid valve
  2. wiring or connector fault
  3. intermediate lock solenoid (newer engines)

P0075 by make

Nissan

Intake valve timing control solenoid circuit open or shorted. VTC stops working: rough idle, flat performance.

Usual causes: intake valve timing control solenoid valve; wiring or connector fault; intermediate lock solenoid (newer engines)

Volvo

Intake valve timing solenoid circuit fault (bank 1). Rough idle and less power.

Usual causes: faulty intake CVVT solenoid; wiring or plug fault

What the repair usually costs

Not sure what P0075 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.