Credov

P0119 fault code: what it means

P0119: Coolant temperature sensor (G62) signal drops in and out. Hard cold starts and a jumpy temp gauge.

Engine and gearbox (powertrain) · Minor

Usual causes, most likely first

  1. faulty coolant temperature sensor (G62)
  2. corroded plug or wiring

P0119 by make

Audi

Coolant temperature sensor (G62) signal drops in and out. Hard cold starts and a jumpy temp gauge.

Usual causes: faulty coolant temperature sensor (G62); corroded plug or wiring

Skoda

Coolant temperature sensor (G62) signal drops in and out. Hard cold starts and a jumpy temp gauge.

Usual causes: faulty coolant temperature sensor (G62); corroded plug or wiring

Volkswagen

Coolant temperature sensor (G62) signal drops in and out. Hard cold starts and a jumpy temp gauge.

Usual causes: faulty coolant temperature sensor (G62); corroded plug or wiring

Not sure what P0119 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.