Audi
No signal from the engine speed (crank) sensor. The engine usually stalls or will not start at all.
P0322 fault code: what it means
P0322: No signal from the engine speed (crank) sensor. The engine usually stalls or will not start at all.
Usual causes, most likely first
- faulty engine speed sensor (G28)
- broken or oil-soaked wiring to G28
- sensor loose in its mount
P0322 by make
Skoda
No signal from the engine speed (crank) sensor. The engine usually stalls or will not start at all.
Volkswagen
No signal from the engine speed (crank) sensor. The engine usually stalls or will not start at all.
What the repair usually costs
- Crankshaft or camshaft position sensor replaceNZ$100–NZ$590 · A$100–A$580
Not sure what P0322 means on your car? Ask Credov.
Before you clear it
Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.
Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.