Credov

P0407 fault code: what it means

P0407: EGR position sensor (G212) signal too low.

Engine and gearbox (powertrain) · Minor

Usual causes, most likely first

  1. faulty EGR valve/position sensor
  2. wiring fault

P0407 by make

Audi

EGR position sensor (G212) signal too low.

Usual causes: faulty EGR valve/position sensor; wiring fault

Skoda

EGR position sensor (G212) signal too low.

Usual causes: faulty EGR valve/position sensor; wiring fault

Volkswagen

EGR position sensor (G212) signal too low.

Usual causes: faulty EGR valve/position sensor; wiring fault

What the repair usually costs

Not sure what P0407 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.