Credov

P0A0F fault code: what it means

P0A0F: Engine failed to start: the hybrid system spun the petrol engine with the motor-generator but it did not fire up.

Engine and gearbox (powertrain) · Costly if missed

Usual causes, most likely first

  1. low or no fuel
  2. dirty air flow meter or intake leak (purge/PCV hose off throttle body)
  3. weak hybrid battery
  4. fuel pump fault

P0A0F by make

Lexus

Engine failed to start: the hybrid system spun the petrol engine with the motor-generator but it did not fire up.

Usual causes: low or no fuel; dirty air flow meter or intake leak (purge/PCV hose off throttle body); weak hybrid battery; fuel pump fault

Mazda

i-stop: engine failed to restart automatically. Most often a weak battery or starter; can strand the car at lights.

Usual causes: weak battery; starter motor or starter relay; generator (alternator) or drive belt wear; VVT or throttle fault affecting piston stop position

Toyota

Engine failed to start: the hybrid system spun the petrol engine with the motor-generator but it did not fire up.

Usual causes: low or no fuel; dirty air flow meter or intake leak (purge/PCV hose off throttle body); weak hybrid battery; fuel pump fault

What the repair usually costs

Not sure what P0A0F means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.