Credov

P0A78 fault code: what it means

P0A78: Drive motor 'A' inverter performance: the inverter section that drives the main traction motor (MG2) has reported a fault.

Engine and gearbox (powertrain) · Costly if missed

Usual causes, most likely first

  1. internal inverter (power module) failure
  2. inverter overheating from a cooling pump fault
  3. motor or HV cable fault

P0A78 by make

Lexus

Drive motor 'A' inverter performance: the inverter section that drives the main traction motor (MG2) has reported a fault.

Usual causes: internal inverter (power module) failure; inverter overheating from a cooling pump fault; motor or HV cable fault

Toyota

Drive motor 'A' inverter performance: the inverter section that drives the main traction motor (MG2) has reported a fault.

Usual causes: internal inverter (power module) failure; inverter overheating from a cooling pump fault; motor or HV cable fault

What the repair usually costs

Not sure what P0A78 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.