P1062 fault code: what it means

P1062: Valvetronic limp-home: the valve lift is stuck at full stroke. The engine runs on the throttle only; rough and down on power.

Engine and gearbox (powertrain) · Costly if missed

Usual causes, most likely first

1. failed Valvetronic motor
2. faulty eccentric shaft sensor
3. stiff eccentric shaft

P1062 by make

Not sure what P1062 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.