Credov

P10DC fault code: what it means

P10DC: Outlander PHEV: engine/generator fail. Engine will not start or run properly; car may run on EV only or lose drive.

Engine and gearbox (powertrain) · Costly if missed

Usual causes, most likely first

  1. engine running fault (misfire or rough running - read the engine codes)
  2. PHEV or engine ECU software needing a reflash
  3. fuel supply fault

P10DC by make

Mitsubishi

Outlander PHEV: engine/generator fail. Engine will not start or run properly; car may run on EV only or lose drive.

Usual causes: engine running fault (misfire or rough running - read the engine codes); PHEV or engine ECU software needing a reflash; fuel supply fault

Not sure what P10DC means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.