Credov

P1349 fault code: what it means

P1349: VVT system malfunction (bank 1), the Toyota/Lexus code on older VVT-i engines: cam timing does not match the ECM command.

Engine and gearbox (powertrain) · Costly if missed

Usual causes, most likely first

  1. low, dirty or sludged engine oil
  2. failed or stuck VVT oil control valve
  3. blocked OCV oil passage/filter
  4. worn VVT-i controller

P1349 by make

Lexus

VVT system malfunction (bank 1), the Toyota/Lexus code on older VVT-i engines: cam timing does not match the ECM command.

Usual causes: low, dirty or sludged engine oil; failed or stuck VVT oil control valve; blocked OCV oil passage/filter; worn VVT-i controller

Toyota

VVT system malfunction (bank 1), Toyota's own code on older VVT-i engines: actual cam timing does not match what the ECM commands.

Usual causes: low, dirty or sludged engine oil; failed or stuck VVT oil control valve; blocked OCV oil passage/filter; worn VVT-i controller

What the repair usually costs

Not sure what P1349 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.