Credov

P13C0 fault code: what it means

P13C0: Intake VANOS stuck: the intake camshaft is not moving. Rough idle and power loss.

Engine and gearbox (powertrain) · Costly if missed

Usual causes, most likely first

  1. sticking intake VANOS solenoid
  2. low or dirty oil
  3. failed VANOS unit

P13C0 by make

BMW

Intake VANOS stuck: the intake camshaft is not moving. Rough idle and power loss.

Usual causes: sticking intake VANOS solenoid; low or dirty oil; failed VANOS unit

Mini

Intake VANOS stuck: the intake camshaft is not moving. Rough idle and power loss.

Usual causes: sticking intake VANOS solenoid; low or dirty oil; failed VANOS unit

What the repair usually costs

Not sure what P13C0 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.