Credov

P1602 fault code: what it means

P1602: Battery supply voltage was too low. Usually a flat or disconnected battery; clear and recheck.

Engine and gearbox (powertrain) · Keep an eye on

Usual causes, most likely first

  1. weak or flat battery
  2. battery recently disconnected
  3. alternator fault

P1602 by make

Audi

Battery supply voltage was too low. Usually a flat or disconnected battery; clear and recheck.

Usual causes: weak or flat battery; battery recently disconnected; alternator fault

Skoda

Battery supply voltage was too low. Usually a flat or disconnected battery; clear and recheck.

Usual causes: weak or flat battery; battery recently disconnected; alternator fault

Volkswagen

Battery supply voltage was too low. Usually a flat or disconnected battery; clear and recheck.

Usual causes: weak or flat battery; battery recently disconnected; alternator fault

What the repair usually costs

Not sure what P1602 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.