Credov

P1693 fault code: what it means

P1693: Immobiliser transponder error: the key isn't being recognised.

Engine and gearbox (powertrain) · Minor

Usual causes, most likely first

  1. faulty key transponder
  2. immobiliser module or antenna coil fault
  3. wiring or connector fault

P1693 by make

Hyundai

Immobiliser transponder error: the key isn't being recognised.

Usual causes: faulty key transponder; immobiliser module or antenna coil fault; wiring or connector fault

Kia

Immobiliser transponder error: the key isn't being recognised.

Usual causes: faulty key transponder; immobiliser system fault; wiring or connector fault

Not sure what P1693 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.