Credov

P2110 fault code: what it means

P2110: Throttle control forced limited rpm: the engine is held to low revs because of a throttle or pedal sensor fault. Seen on BA Falcon.

Engine and gearbox (powertrain) · Costly if missed

Usual causes, most likely first

  1. accelerator pedal sensor fault
  2. throttle body
  3. faulty part pulling down the 5 V sensor supply (eg power steering switch on BA)

P2110 by make

Ford

Throttle control forced limited rpm: the engine is held to low revs because of a throttle or pedal sensor fault. Seen on BA Falcon.

Usual causes: accelerator pedal sensor fault; throttle body; faulty part pulling down the 5 V sensor supply (eg power steering switch on BA)

Jeep

Throttle actuator control system forced limited RPM (limp mode).

Usual causes: electronic throttle body fault; accelerator pedal sensor; wiring

What the repair usually costs

Not sure what P2110 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.