Credov

P215C fault code: what it means

P215C: Output shaft speed / wheel speed correlation (Cherokee KL). Same broken-PTU-spline bulletin as P1720; vehicle may suddenly not move.

Engine and gearbox (powertrain) · Safety risk

Usual causes, most likely first

  1. broken PTU input spline
  2. output speed sensor
  3. wheel speed sensor

P215C by make

Jeep

Output shaft speed / wheel speed correlation (Cherokee KL). Same broken-PTU-spline bulletin as P1720; vehicle may suddenly not move.

Usual causes: broken PTU input spline; output speed sensor; wheel speed sensor

What the repair usually costs

Not sure what P215C means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.