Credov

P2750 fault code: what it means

P2750: CVT secondary pulley speed sensor disagrees with VDC vehicle speed. Shift shock and poor take-off.

Engine and gearbox (powertrain) · Costly if missed

Usual causes, most likely first

  1. secondary speed sensor
  2. wiring fault
  3. ABS wheel speed fault

P2750 by make

Subaru

CVT secondary pulley speed sensor disagrees with VDC vehicle speed. Shift shock and poor take-off.

Usual causes: secondary speed sensor; wiring fault; ABS wheel speed fault

Not sure what P2750 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.