Credov

P2763 fault code: what it means

P2763: CVT lock-up clutch pressure solenoid circuit high/open. No lock-up; engine may stall when stopping.

Engine and gearbox (powertrain) · Costly if missed

Usual causes, most likely first

  1. lock-up pressure solenoid
  2. wiring open or short to power

P2763 by make

Subaru

CVT lock-up clutch pressure solenoid circuit high/open. No lock-up; engine may stall when stopping.

Usual causes: lock-up pressure solenoid; wiring open or short to power

Not sure what P2763 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.