U1110 fault code: what it means

U1110: Minimum engine torque signal from the engine computer not available (seen by ABS). Treated as a CAN communication fault; ESC may be limited.

Network (communication between modules) · Minor

Usual causes, most likely first

CAN C bus open or short
ABS module
PCM

U1110 by make

Jeep

Minimum engine torque signal from the engine computer not available (seen by ABS). Treated as a CAN communication fault; ESC may be limited.

Usual causes: CAN C bus open or short; ABS module; PCM

What the repair usually costs

ABS pump / control module replacement (reman exchange or new)NZ$850–NZ$3,210 · A$780–A$2,880

Not sure what U1110 means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.