U130F fault code: what it means

U130F: Hyundai: DC fast-charger (EVSE) communication error. DC charging stops or won't start.

Network (communication between modules) · Minor

Usual causes, most likely first

charging station fault
charge port/inlet
charging control module

U130F by make

Hyundai

Hyundai: DC fast-charger (EVSE) communication error. DC charging stops or won't start.

Usual causes: charging station fault; charge port/inlet; charging control module

What the repair usually costs

EV charging port repair (pins, latch actuator, flap, seal)NZ$140–NZ$710 · A$150–A$710
EV charging inlet and harness replace (Type 1 / Type 2 / CHAdeMO / CCS)NZ$930–NZ$2,780 · A$920–A$2,880

Not sure what U130F means on your car? Ask Credov.

Before you clear it

Write the code down or photograph the scanner first. A code that comes straight back after clearing points to a fault that is still there. A car whose codes were cleared just before you arrived may be hiding one: the scanner's readiness monitors show "not ready" for a while after codes are cleared.

Researched by Credov from manufacturer and workshop sources. A fault code points to where a fault may be; a workshop confirms it with a diagnosis. Browse all fault codes.